Description
The UniPower is a single-speed winch that combines the advantages of a low-profile manual winch with the power of a 12- or 24-volt, low-amp-draw motor. What makes it unique is that the motor is partially imbedded inside the drum, so that it extends only 105 mm (4 1/8 inches) below the winch base a critical feature for small boats where space under the cabin top is limited. Composite roller bearings reduce friction under load and don’t require lubrication. Gears are 17-4PH stainless steel for strength and durability. Harken recommends the single function digital switch DSSBK and circuit breaker HCP1717. Sold separately.
| Height (mm) | 215 mm |
| Height (in) | 8 1/2 in |
| Weight (kg) | 15.7 kg |
| Weight (lb) | 34.6 lb |
| Maximum line Ø (mm) | 14 mm |
| Maximum line Ø (in) | 9/16 in |
| Number of fasteners | 5 |
| Fasteners (mm) | M8 SH mm |
| Fasteners (in) | 5/16 SH in |
| Fastener circle (mm) | 160 mm |
| Fastener circle (in) | 6 5/16 in |
| Minimum line Ø (mm) | 8 mm |
| Minimum line Ø (in) | 5/16 in |
| Configuration | Self-tailing |
| Speed | 1 |
| Drum Ø (mm) | 110 mm |
| Drum Ø (in) | 4 3/8 in |
| Base Ø (mm) | 190 mm |
| Base Ø (in) | 7 1/2 in |
| Line entry height (mm) | 100 mm |
| Line entry height (in) | 3 15/16 in |
| E (mm) | 35 mm |
| E (in) | 1 3/8 in |
| F (mm) | 105 mm |
| F (in) | 4 1/8 in |
| G (mm) | 140 mm |
| G (in) | 5 1/2 in |
| Material | All-Chrome |
| Maximum pulling load (kg) | 900 kg |
| Maximum pulling load (lb) | 1984 lb |
